Flanges

Our customers need to have a good profit and Hassann Al Manaei Trading L.L.C  has the knowledge of industrial flanges that will help our customers to achieve their cost goals. Our commitment when supplying flanges is to provide the best quality, top notch service, and lowest cost. Hassann Al Manaei Trading L.L.C  imports and sells a full range of industrial flanges. Products such as stainless steel flanges, carbon steel flanges (forged & casting) and more that are supplied by us are used in fabrications worldwide.

 

Slip-On Flanges

slip-On Flanges

The Slip-On flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger than the outside diameter of the matching pipe. They are preferred over welding neck flanges by many users due to their lower initial cost, but total cost after installation is probably not much less than that of the welding neck flange because of the additional welding involved.
AVAILABLE IN STAINLESS STEEL AND CARBON STEEL

Size            :   1/2″ ~ 32″
Pressure   :  CL150, CL300, CL600, PN10, PN16, PN25, PN40
Specs        :  A105, A182 (304/316) – A350 (FwdDI)
Brand       :  Hilton, Viraj, Neumira, Ulma, Metafar, Bebitz
Origin       : India, Spain, Germany, Italy, China

Welding Neck Flanges

Welding Neck Flanges

The welding neck flange is normally referred to as the “high hub” flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrates at the base of the flange. The welding neck flange is the best designed butt-welded flange of those currently available because of its inherent structural value.

AVAILABLE IN STAINLESS STEEL AND CARBON STEEL

Size                  :  1/2″ ~ 32″
Pressure          : CL150, CL300, CL600, PN10, PN16, PN25, PN40
Specs               :  A105, A182 (304/316) – A350 (FwdDI)
Brand              : Hilton, Viraj, Neumira, Ulma, Metafar, Bebitz
Origin              : India, Spain, Germany, Italy, China

Blind Flanges

Blind-Flanges

The blind flange is a flange without a bore. It is used to close off the ends of a piping system and/or pressure vessel opening. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened.

AVAILABLE IN STAINLESS STEEL AND CARBON STEEL

Size              :  1/2″ ~ 32″
Pressure      :  CL150, CL300, CL600, PN10, PN16, PN25, PN40
Specs           : A105, A182 (304/316) – A350 (FwdDI)
Brand          : Hilton, Viraj, Neumira, Ulma, Metafar, Bebitz
Origin          : India, Spain, Germany, Italy, China

Threaded (Screwed) Flanges

Threaded (Screwed) Flanges

The threaded flange is similar to the slip-on flange, but the bore is threaded. Its advantage is that it can be assembled without welding, expanding its use in low pressure services at ordinary atmospheric temperatures, and in highly explosive areas where welding creates a hazard.

AVAILABLE IN STAINLESS STEEL AND CARBON STEEL

Size              :  1/2″ ~ 32″
Pressure      :  CL150, CL300, CL600, PN10, PN16, PN25, PN40
Specs           : A105, A182 (304/316) – A350 (FwdDI)
Brand          : Hilton, Viraj, Neumira, Ulma, Metafar, Bebitz
Origin          : India, Spain, Germany, Italy, China

 

Socket Welded Flanges

Socket Welded Flanges

The socket welding flange is similar to a slip-on flange except it has a bore and counter-bore dimension. The counter-bore is slightly larger than the outside diameter of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on flange. The diameter of the smaller bore is the same as the inside diameter of the matching pipe. A restriction is built into the bottom of the bore which allows the pipe to rest on, eliminating any restrictions in flow.

AVAILABLE IN STAINLESS STEEL AND CARBON STEEL

Size              :  1/2″ ~ 32″
Pressure      :  CL150, CL300, CL600, PN10, PN16, PN25, PN40
Specs           : A105, A182 (304/316) – A350 (FwdDI)
Brand          : Hilton, Viraj, Neumira, Ulma, Metafar, Bebitz
Origin          : India, Spain, Germany, Italy, China